How To Repair A Window Motor Elantra 2008

Power windows arrive like shooting fish in a barrel to open windows in all parts of the motorcar. Broken ability windows, notwithstanding, are not then prissy, especially if they get stuck in hot or cold weather condition. Luckily, power windows are commonly one of the more than reliable systems on a tardily-model machine, and diagnosis and repair is normally pretty straightforward. If the switch becomes broken, you lot will either need to repair information technology or supplant information technology. Fortunately, making a power window repair is usually a simple DIY project that you tin do by following the steps below.

Tools You'll Need

Screwdriver
Flat-tipped screwdriver
Multimeter or Voltmeter/Ohmmeter

Find the Problem

Locate the fuse box, unremarkably under the dashboard well-nigh the steering wheel, and bank check for blown fuses. Replace whatsoever diddled fuses, and bank check for loose wires coming in and out of the fuse box. Tighten the loose wires and run across if the windows are working at present.

If only the window on i side isn't working, the trouble could be a nonfunctional switch. Information technology's too possible that there's a problem with the window's motor, or at that place could be faulty wiring leading from the switch to the motor. Since there tin can be many reasons why a power window doesn't piece of work, information technology's important to inspect the unabridged apparatus thoroughly to identify the verbal problem.

Examine the Switch

Switches for passenger windows are wired to the switches on the driver's side. If in that location is a trouble with the passenger windows, it could exist an issue with either the switches on the passenger windows, or the ones located on the driver's side.

Remove the Switch

There are a total of four tabs on each of the window switches. Each of these four tabs will have to be released to remove the switch. A lot of caution should be used when releasing the tabs,they're extremely sensitive and can break easily. Use a flat-tipped screwdriver and slide it under two of the tabs, then release them with a quick motion. As a note, some vehicles may crave that you remove the panel to get admission to the switch.

Bank check if the Switch Works

Check the contacts of the switches with the multimeter. If in that location is high resistance on the switches, it could be because dirt has settled on them. If this is the case, just cleaning the contacts tin can solve the issue. Once the contacts have been cleaned, put the switch back on the assembly by re-inserting the tabs.

Re-Examine The Switch

In one case the switch has been reinstalled, cheque to see if it functions ordinarily again. Push button the switch and see if the windows are working again.If the windows are working and so y'all probably don't accept to do annihilation else. If the trouble persists, the switch will probably need to be replaced.

Installing a New Switch

Before installing the new switch cheque to make certain the contacts are clean. At that place shouldn't be any kind of clay, debris, or rust on the contacts. In one case the new switch passes inspection, remove the onetime switch and replace it with the new one. Be careful to spike the tabs properly. Check the windows by rolling them upwards and downwardly. If the windows are still not working the issue could be faulty wiring. If that's the case, it will require further checking, and is probably best washed by a car mechanic.